FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 2450 Parts

Category: Drive Train

[Categories] [All 2450 Parts] [All John Deere Models]

Axle Bearing - Part 2 in picture. For tractor models (1550, 1750, 1850 SN# 750789 and up), 1640, 1850N, 1950N, 2040, 2040S, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N. (Item #: 112468, Ref: S.07772) $43.50

Axle Drive Shaft - Part 3 in picture. For tractor models (1550, 1750, 1850 SN# 750789 and up), 1640, 1850N, 1950N, 2040, 2040S, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N. (Item #: 124721, Ref: S.07701) $95.00

Axle Gear - Part 1 in picture. For tractor models (1550, 1750, 1850 SN# 750789 and up), 1640, 1850N, 1950N, 2040, 2040S, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N. (Item #: 124631, Ref: S.07700) $107.00

Axle Ring Gear - Part 4 in picture. For tractor models (1550, 1750, 1850 SN# 750789 and up), 1640, 1850N, 1950N, 2040, 2040S, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N. (Item #: 124630, Ref: S.07702) $366.80

Axle Seal - Part 6 in picture. For tractor models (1550, 1750, 1850 SN# 750789 and up), 1640, 1850N, 1950N, 2040, 2040S, 2155, 2250, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N. (Item #: S.07773) $5.93

Countershaft Gear, Transmission - 16/12/12 spline, 4.020" long. For tractor models (1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440 SN# up to 340999 less hi-lo shift), 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2120, 2150, (2155, 2355, 2555 less reverser), 2250, 2255, 2350, 2450, 2550, 820, 830, 840, 920, 940, 1040. (Item #: T24728) $238.45

Differential Gear Thrust Washer - When replacing L29227 differential spider gear, it is advised that these washers also get replaced. Four are used, sold individually. Used on John Deere 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2130, 2140, 2150, 2250, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3640, 3650. Replaces John Deere part number L31793 (Item #: 161853, Ref: L31793) $10.00

Differential Pinion Gear - Measuring 3 7/8 inches outside diameter, 1 11/16 inches inside diameter with 28 splines, 1 3/16 inches thick with 18 external teeth. This part replaces John Deere part numbers L28376, L158220 (Item #: 173236, Ref: L28376) $98.00

Gear (2ND and 6TH) - 36/20 teeth. For JD 2040S, 2130, 2140, 2555, 2630, 2640, 2750, 2755, (1550, 1750, 1850, 2155, 2355, 2450, All SN# 756484>) (Item #: 172310, Ref: L28664) $185.00

Gear Shift Lever Washer And Snap Ring Kit - Retains the gear shift lever into the housing. Measures: 0.254 inches thick, 1.368 inch outside diameter and 0.998 inch inside diameter. L, LA, LI, M, MC, MI, MT, MTN, MTW, 1010, 1020, 1030, 1035, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1635, 1640, 1641, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2035, 2040, 210C, 2120, 2130, 2135, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2651, 2750, 2755, 2840, 2850, 2855, 2940, 2941, 2950, 2951, 2955, 300B, 300D, 301A, 302A, 3030, 3040, 3050, 310A, 310B, 310C, 310D, 3120, 3130, 3135, 3140, 3141, 3150, 315C, 315CH, 315D, 320, 330, 3340, 3350, 3351, 350B, 350C, 350D, 355D, 3641, 3651, 40, 401B, 401C, 401D, 410B, 410C, 410D, 415B, 420, 430, 435, 440, 480A, 480B, 480C, 510B, 510C, 510D, 515B, 610B, 610C, 710B, 710C, [820 3 cylinder, 830 3 cylinder, 840 (3 cylinder)], 920, 930, 940, 940V, Industrial: 300, 301, 302, 310, 350, 380, 400, 401, 410, 480. Replaces: L4027, L4035. (Item #: 129237, Ref: 70202875) $17.00

PTO Open Single Row Ball Bearing - For John Deere tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2250, 2355, 2440, 2450, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2940, 2950, 2955, 3020 (s/n 123000-later), 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 3350, 3650, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, 500, 600, Replaces John Deere OEM number JD9320, I.D.: 2.559", O.D.: 4.724", Width: .906", (Item #: 121743) $15.20

PTO Shaft - 540 RPM - For John Deere tractor models 840, 940, 1040, 1140, 1350, 1550, 1640, 1750, 1840, 1850, 1950, 1950N, 2040, 2040S, 2140, 2150, 2155, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N, Replaces John Deere OEM number L39949, Length: 40", Spline: 6, 540 RPM, (Item #: 162348) $556.00

Pinion Gear, Planetary - 18 teeth, 1.759" wide. For tractor models 1020, 1120, 1130, 1140, (1350 SN# 627639 and up), 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1950, 1950N, 2020, 2030, 2040, 210C, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, (2440 SN# up to 340999), 2450, 2550, 2555, 300B, 300D, 301A, 302, 302A, 310A, 310B, 310C, 310D, 315C, 401B, 401C, 401D, 410, 480C, 482C, 820, 920, JD300, JD301, JD310, JD380, JD400, JD401, JD480. (Item #: 126896, Ref: T21547) $60.00

Pinion Gear, Planetary - 26 tooth, 2.243 inches wide. For tractor models: 1640, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2250, 2355, 2355N, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N. (Item #: 185473, Ref: T29444) $85.30

Planetary Drive Shaft - 15 Tooth, 28 Spline, 12.500 inch long. For 1640, 2040, 2040S, 2140 SN# 370493->, 2141, 2250, 2355, 2355, 2450, 2541, 2550, 2650, 2650N, 2651, 2750, 2755, 2850, 2855, 2855N tractors (Item #: L36202) $185.09

Shift Collar - 20 spline. For tractor models 1052, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2120, 2130, 2140, 2150, 2155, 2250, 2255, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 820, 840, 920, (2040, 2240 SN# 350000 and up). (Item #: 172429, Ref: L29283) $80.00

Shift Collar, Transmission Countershaft - 20 spline. For tractor models (1020, 1120, 2020, 2120 SN# 77422 and up), (1030, 1130, 1630 SN# 317105 and up), 1140, 1350, 1550, 1640, 1641F, 1750, 1830, 1840, 1850, 2030, (2040, 2240 SN# 350000 and up), 2130, 2140, 2150, 2155, 2250, 2255, 2350, 2355, (2440 SN# up to 340999), 2450, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 840, 940. (Item #: 126887, Ref: R50655) $57.00

Transmission Filter - Transmission oil filter. Filter element, cartridge type. Replaces AR28271, AR75601. For tractor models 2510, 3010, 4010, 5010, 80, 820, 1020, 1120, 1520, 2020, 2120, 2520, 3020, 4020, 4320, 4520, 4620, 5020, 7020, 7520, 830, 840, 1530, 2030, 2630, 4030, 4230, 4430, 4630, 6030, 8430, 8630, 2040, 2240, 2640, 2940, 2150, 2350, 2450, 2550. (Item #: 110864, Ref: AR75603) $12.30

Transmission Gasket Set - For 840, 940, 1040, 1140, 1350, 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2940, 2950, 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650. Transmission Gasket Set. 24 Pieces. (S.58863) (Item #: 161857, Ref: S-AL57975) $30.00

Universal Parts and Accessories
Category: Drive Train

Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Item #: 108599, Ref: LU10088) $10.90

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Drive Train

[Categories] [All 2450 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy